RSS

[myso]

Dalsi zaujimavy navrh:
Need a solo boost? Providing you don’t use external effects in your FX Loop, here’s the solution! Insert a dummy jack plug into the Return jack socket of the FX Loop on the rear panel of the amp. Using the foot-switch, ensure that the FX Loop is switched OFF. Now, set the Channel Volume and Master Volume at the loudest setting required for the gig. Using the foot-switch set the FX Loop ON (the LED should glow red). All you need to do now is set your quieter volume using the FX Mix control on the front panel. Access the “solo boost” by toggling FX Loop On/Off via the included five-way foot-switch. Voila, instant access to a solo boost. You may wish to try the Loop Level push switch on the rear panel to see what works best for you, pushed IN (-10 dB) and OUT (+4dB). In any event, a little experimentation is required to set everything just right. Normal operation will require that the FX Loop be switched ON all the time and switched OFF when a solo boost is required...

Vyskusam, a dam vediet. Mozno sa bude niekomu tiez hodit...