RSS

[reeller_sk]

este ta gitara sama znie ako tak, dokopy je to vsak neskutocny grc.

To je skorej ale mixom.

[tibor7]

tato ukazka je pekna Recto Orange by Vinai Trinatee http://soundcloud.com/fractalaudio/recto-orange-by-vinai/

Však toto je hrozný zvuk! Toto sa môže niekomu páčiť?  Piesková,štrková, processorová , umelá p**čovina - však nebudme už tu všetci ko**ti...

[Krtko]

Však toto je hrozný zvuk! Toto sa môže niekomu páčiť?  Piesková,štrková, processorová , umelá p**čovina - však nebudme už tu všetci ko**ti...

ale ze by si to v nahravke ani omylom nerozonal od nicoho analogoveho, mikrofonoveho, organickeho a vanilkoveho? (ziadne lepsie protiklady ku tym prijebanym hlaskam ma zial nenapadli)

[Branko]

Však toto je hrozný zvuk! Toto sa môže niekomu páčiť?  Piesková,štrková, processorová , umelá p**čovina - však nebudme už tu všetci ko**ti...

Pocul si uz kedysi cisto nasnimany aparat mikrofonom ? Ja hej a zatial vsetky boli tak napicu, ako aj tento. Dolezite je ako tento hnusny, odporny zvuk zapadne v kapele, v nahravke.

[pelko]

Však toto je hrozný zvuk! Toto sa môže niekomu páčiť?  Piesková,štrková, processorová , umelá p**čovina - však nebudme už tu všetci ko**ti...

znie to uplne normalne ako hociaky surovy zosnimany aparat. Asi si toho počul fakt malo

[bigbadbrad]

ako robit impulzy cez axe

http://www.youtube.com/watch?feature=player_embedded&v=jqaTewi4e4E

[Semish]

Vcera vysiel novy firmware pre Axe II :

Axe-Fx II Firmware Release Notes
*******************************************************************************
3.00
NOTE: THIS VERSION WILL LIKELY CHANGE THE SOUND OF EXISTING PRESETS. THERE HAVE BEEN NUMEROUS CHANGES AND IMPROVEMENTS. YOU SHOULD AUDITION ALL YOUR PRESETS AFTER INSTALLATION AND CHECK FOR PROPER OPERATION AND TONE. AN AMP MODEL CAN BE RESET BY TEMPORARILY CHANGING THE AMP TYPE AND THEN CHANGING BACK TO THE DESIRED TYPE. THIS WILL LOAD THE MODEL WITH DEFAULT PARAMETERS.
NOTE: FACTORY BANK A HAS BEEN REDONE TO REFLECT THE CHANGES AND IMPROVEMENTS. THE SYSEX FILE TO INSTALL THIS BANK IS INCLUDED ALONG WITH THIS FIRMWARE.
Added IR Capture feature. Please see the separate instructions for details on the use of this feature.
Greatly improved power amp modeling. New pentode model with adjustable hardness. Improved power supply modeling. Improved screen grid modeling and bias excursion modeling (more apparent “knock” on high-gain tones).
Added POWER TUBE HARDNESS parameter. This parameter adjusts how rapidly the power tubes enter saturation. Higher values give a slightly more aggressive distortion character. Lower values give a smoother breakup.
Added TRANSFORMER MATCH parameter. This is an extremely powerful parameter that sets the relative output transformer primary impedance which in turn controls how easily the power tubes are driven into clipping. The higher the Master Volume setting the more pronounced the effect of this parameter. Decreasing the matching causes the power tubes to clip later and therefore the phase inverter and grid clipping becomes more predominant. Increasing the matching causes the power tubes to clip sooner. At lower settings the speaker resonance will be more pronounced, at higher settings the speaker resonance will be less pronounced. For optimum results bring up the Master until the desired amount of power amp distortion is achieved, then adjust the matching until the character of the distortion is as desired. The various LF and HF resonance parameters interact strongly with this parameter so be sure to experiment with those as well when crafting your ideal tone. The value of this parameter is relative to the actual transformer matching which is set internally and not directly exposed. The value is reset to 1.0 whenever they amp type is selected.
Added AMP VOICING parameter. This parameter voices the amp to a variety of tonal styles. Voicings take the guesswork out of mix engineering by automatically crafting the tone like a professional engineer would. Choose “Neutral” for the raw amp sound. Choose one of the other voicings to rapidly achieve a mix-ready tone.
Improved speaker load modeling. Now incorporates magnetic eddy current losses.
Added speaker impedance graph to the Amp block and moved all related parameters to that page. This graph allows you to visualize the resulting speaker impedance curve and how the various parameters affect the impedance. Note that
the power amp frequency response will not equal the speaker impedance if the Damping is greater than 0. This is because negative feedback flattens the response curve.
Added quick reset to amp block graphic EQ. Pressing Enter while in the EQ menu resets all bands to zero.
Added mid-frequency resonance to Amp block. While most speakers don’t have a mid-frequency resonance, this parameter allows you to fine-tune the edge-of-breakup profile enabling you to achieve “hyper-realistic” tones.
Added “TX STAR” amp model. This model is based on the lead channel of a Mesa Lonestar.
Added “FAS WRECK” model. This model is based on the original WRECKER 1 model from the Axe-Fx Ultra.
Added “PRINCE TONE” model. Based on a single-ended Fender Princeton model 5F2-A.
Reworked “MR Z 38 SR” model. If you are using this model it is highly recommended that you reset the model by selecting another model and then reselecting the “MR Z 38 SR” model.
Reworked “BRIT JM45” model. Model is now based on Channel 1 (the bright channel).
All amp models have been reworked to some extent. The models listed above received major rework.
Reprocessed most Redwirez cabinet IRs to reduce excessive low end.
Reworked all mic models and added Proximity parameter to allow the user to adjust the desired proximity effect.
Improved Spring Reverb modeling.
Added Drive parameter to Spring Reverb modes.
Added LOWCUT parameter to Pitch block.
Changed preset recall “wraparound” so that recall stops at the wrap point briefly. Continuing to increase or decrease the value will then result in the preset wrapping around after a brief period.
Improved Output Level knob tapers.

[kaolko]

chalanom z mnemicu sa nakoniec axe vcera nepacilo?

[Semish]

chalanom z mnemicu sa nakoniec axe vcera nepacilo?

Vcera bola kombinacia mojej Peavey hlavy (Mircea) a Axe Fx Ultra (Victor).
Nepacila sa im kombinacia dvoch Axe, ale myslim si ze to bolo tym presetom co mi poslali.

Vlastne nedavno sa tu riesilo ze ci niekto pouzil kombinaciu v kapele digital a lampa, vcera bolo mozne pocut takuto kombinaciu nazivo v MMC

[kaolko]

hmm zaujimave.. ako, vcera to dost bucalo v spodkoch ale este stale som mal pocit ze tomu chalanovi s osmickou to hralo lepsie..aspon ja som mal dojem ze naj zvuk vecera ste mali aj tak vy..

[Semish]

hmm zaujimave.. ako, vcera to dost bucalo v spodkoch ale este stale som mal pocit ze tomu chalanovi s osmickou to hralo lepsie..aspon ja som mal dojem ze naj zvuk vecera ste mali aj tak vy..

No vidis , ja som pocul zasa aj nazory ze sme mali hrozny zvuk . Inak vcera sme tam dotrepali 3 Axe (2x Ultra, 1x Axe II), a uz to chvilu vyzeralo ze sa bude hrat iba na Peavey hlavy.
Ten s osmickou hral prave na Peavey, sedmicka XL bola cez Axe.

[Branko]

 

[Krtko]

fasa zvuk, hra a riff

[telcontar]

konecne normalna predvadzacka Axe FX

Uz som si myslel, ze to okrem ultrahajgejndjentmegatight zvuku ine nedokaze.

[tibor7]

Ja tiež. Toto je ozaj dobré.